HTC LD-70, Руководство пользователя

Страница: 9 / 16

8
7.4 Measurement benchmark setting
Press the key to s witch between front and end benchmark. System
usually takes end benchmark as default.
7.5 Single Measurement and Continuous Measurement:
● Press the key whilst in measuring mode will emit the laser to the
target measuring location. Re-press the key for a single measurement of
distance. The measured results will be displayed on the LCD screen.
● Long press the key whilst in measuring mode to enter continuous
measurement. Maximum and minimum measured values during continuous
measurement will display on the screen. The current measured values will display
on the main display screen. Press the key again to exit continuous measurement.
7.6 Area Measurement:
Press the key, the rectangle icon with one edge flashing will
appear on the left screen. Complete the following operations according to
screen tips:
1) Press the key to measure the fist edge(length).
2) Press the key to measure the second edge(width). Area will be
calculated automatically by the meter and the results shown on main display
screen.
3) Press the key again to remove previous measured result and to exit the
area measurement.