HTC HTC 800 RXP, Руководство пользователя

Страница: 23 / 28

Problem Possible cause Possible procedure
The machine stops - radio control Other equipment can interfere with
the radio traffic between the machine
and the radio control unit, which
means that the communication error
indicator (ComError) can start to blink
on and off. When the contact be-
tween the machine and the radio con-
trol has been broken for too long the
machine stops for safety reasons.
Switch off any interfering equipment
and restart the machine.
The machine cannot cope. High load Press the handle down slightly so that
the grinding head eases slightly away
from the surface being ground.
Sticky coating on the surface being
ground.
Run half of the machine on the sur-
face to be cleaned and half on the
clean surface. This removes any resi-
due from the tools.
Damaged or incorrectly fitted tools on
the machine.
Examine the tools. Refit the tools or
replace the tools, if it is necessary.
The grindning does not start, even
though the motor appears to function
correctly.
The belt in the gearbox is broken. Replace the belt in the gearbox.
The clutch slips. Speak to your nearest dealer.
888 - 001 - Troubleshooting - 23