4
explosion.
♦When the machine is turned on, do not hold the trigger or
clamp any wires.
♦The object to be measured can only be clamped after the
“OL Ω” symbol is displayed after it is turned on normally.
♦ Do not place and store the meter for a long time in places
with high temperature and humidity, condensation and direct
sunlight.
♦ When replacing the battery of the meter, please make sure
that the meter is turned off.
♦The meter displays the low battery voltage symbol “
”,
the battery should be replaced in time, otherwise it will lead to
ground error.
♦ The contact surface of the jaws must be kept clean and
cannot be wiped with corrosives and rough objects.
♦ When opening the trigger, avoid shock to the clamp meter,
especially the jaw interface.
♦When the clamp meter is measuring resistance, the clamp
head will make a slight noise, which is normal.
Pay attention to the "beep-beep-beep--" sound to distinguish
the alarm.
♦Pay attention to the measurement range and operating
