16
The large number in the middle shows "OLΩ", indicating that
the measured resistance exceeds the upper limit of the clamp
meter.
The large number in the middle shows
"L0.01Ω", which means that the measured
resistance exceeds the lower limit of the clamp
meter.
In the "resi current" mode, the lower
right of the display shows the current value,
such as "0.00mA", if you need to measure the
current, switch to this mode to read the current
value directly.
Resi Current Mode:
The measured resistance value is 0.51Ω,
The number of saved groups is 1 group, and the measured loop
current is 0.00mA
4.Alarm system
After power on, short press the "AL" key to turn on or off the
alarm function, long press the "SET" key to set the resistance,
