Doc. No.
DOC-00040948
REV.
Issued Date
2008/8/28
HTC Corporation
Revised Date
2008/8/28
A03
Doc. Title
Athena 1.5 Service Manual
Page
50 of 110
1. Use plastic handle and defeat and shut the
lower of main unit aluminums and check gap
is OK.
2. Constructed and defeated shutting to both
sides by the middle.
1. Open the battery cover before assembly
the Bottom Cover into unit.
2. Then tighten three screws.
3. The Bottom Cover has magnets, be
careful to tighten the screws.
9
SCREW: 72H01853-00M (Q’TY: 3).
[NOTE]
PLEASE SET UP THE TORQUE OF ELECTRICAL SCREW
DRIVER TO 0.6
±
0.05KGF-CM
HTC CONFIDENTIAL
The figure is for reference:
Gasket is filled in the relative
position in the bezel.
