Introduction
HTC 800 RX
2
2.0
Warning!
This symbol means
Warning!
and indicates that incorrect use can result in
material damage to the machine or accessories. If you see this symbol next to a
section of text, you must be particularly careful when reading through the text
and not carry out any stages of which you are unsure. This is for your own and
other users' safety and to avoid damage to machinery or other equipment.
Note!
This symbol means
Note!
and indicates that material damage can occur if the
machine or its accessories are used incorrectly. If you see this symbol next to a
section of text, you must be particularly careful when reading through the text
and not carry out any stages of which you are unsure. This is to avoid damage
to the machine or other equipment.
Tip!
This symbol means
Tip!
and indicates that you can get tips and advice on ways
to make operating your machine or associated equipment easier, and to avoid
wear. If you see this symbol next to a text, you should read through the text to
make your work easier and to extend the service life of the machine.
1.4
Transportation
Note!
The machine cannot be moved manually if the drive wheels are locked and the
radio control activated.
Warning!
Never deactivate the radio control function when you have stopped the machine
on a sloping surface during loading, since the machine can start to roll.
Always make sure that the grinder is securely anchored to its surroundings and the
grinding head is lowered against the surface.. Make sure that the securing straps or other
equipment used for anchoring during transport are tightened over non-moving parts, e.g.
the grinder's chassis.
The machine can also be transported with other lifting equipment, for example truck or
crane, using the lifting eyes provided, position 4, Figure 3-1, page
10
. In which case,
make sure that the weights are locked in the forward position and that the handle is in its
back position, see Figure 4-6, page
20
and Figure 4-2, page
17
.
When lifting the grinder, lifting straps must be used. These must be attached
well-secured in the lifting eyes provided, position 4, Figure 3-1, page
10
. Only use
lifting straps approved for lifting equipment.
