HTC Sweden AB 650 RX, Руководство пользователя

Страница: 44 / 52

Electronic error codes HTC 650 RX
36 5.0
7 Electronic error codes
7.1 Error Codes
Code Cause Action
0001 Excess current Review tool selection.
Reduce the grinding speed.
Check that the grinding head/drive motor are moving
freely.
Check the motor cable and connector.
Check the motor.
0002 Excess voltage Check if the power supply is showing static or transient
excess voltage.
0003 Excess temperature in the converter Check the cabinet cooling system.
Ensure that the cabinet is clean.
Check the converter's cooling fan. Clean the filter.
0004 Short circuit in motor or motor cable Check the motor cable and connector.
Check the motor.
0006 Under-voltage Check the feed fuse and the mains fuse. Check the cable
dimension and length.
0009 Motor temperature too high due to
overload Check that the grinding head/drive motor are moving
freely.
Check the motor's cooling flanges and fan.
0010 Panel dropout Check panel connection.
0012 Locked motor Check that the grinding head is moving freely.
0016 Earth fault Check the motor cable and connector.
Check the motor.
0022 Phase failure on supply in Check supply fuses.
Check if there is a lack of symmetry in the mains supply.
0034 Phase failure in motor Check the motor cable and connector.
Check the motor.
2001 Output current limiter active Check that the grinding head/drive motor are moving
freely.
Check the motor cable and connector.
Check the motor.
2008 Communication fault, panel Check panel connections.
2009 Excess temperature in the converter Check the cabinet cooling system.
Ensure that the cabinet is clean.
Check the converter's cooling fan. Clean the filter.
2010 High motor temperature Check that the grinding head/drive motor are moving
freely.
Check the motor's cooling flanges and fan.
2012 The motor is operating in the locking
range Check that the grinding head/drive motor are moving
freely.