HTC Sweden AB 650 RX, Руководство пользователя

Страница: 11 / 52

HTC 650 RX Introduction
5.0 3
Do not transport the grinder on sloping surfaces, e.g. loading ramps, without securing it
by the lifting eyes, position 3, Figure 3-1, page
10 for example with a winch. This is a
safety measure in case the grinder starts to roll out of control. Also make sure that
people (including operator) in the vicinity are at a safe distance in order to prevent
personal injury, in the event that the grinder starts to roll out of control.
1.5 On delivery
The following items are included in the delivery. Contact your retailer if anything is
missing.
• Grinding machine
• Manual disc
• Locking key for control cabinet
• Start key
• Hammer EZ system
• The radio control unit
1.6 Unpacking the equipment
Warning!
Read carefully through the safety instructions and user manual before using the
equipment.
• Check the packaging and equipment carefully on delivery for any possible
transportation damage. If there is any sign of damage, contact your retailer and
report it. Report packaging damage to the transport company as well.
• Check that the delivery matches the order. If there are any discrepancies, contact
your retailer.
• When lifting the grinder, lifting straps must be used. These must be attached
well-secured in the lifting eyes provided, position 3, Figure 3-1, page
10 . Only
use lifting straps approved for lifting equipment.
1.7 Machine name plate
The machine name plate provides the following information. The model and serial
number must be specified when ordering spare parts for the machine.