QUICKLAN 6050N
EN - 16
6. MAINTENANCE
6.1. GENERAL
INFORMATION
1. While using and storing the instrument, carefully observe the recommendations listed in
this manual in order to prevent possible damage or danger during use.
2. Do not use the instrument in environments with high humidity levels or high
temperatures. Do not expose to direct sunlight.
3. Always switch off the instrument after use. In case the instrument is not to be used for a
long time, remove the battery to avoid liquid leaks that could damage the instrument
’
s
internal circuits.
6.2. BATTERY
REPLACEMENT
When the LCD display shows symbol
“
”
, batteries must be replaced.
CAUTION
Only expert and trained technicians should perform this operation. Before
carrying out this operation, make sure you have disconnected all cables from
the input terminals.
Fig. 16: Replacing internal batteries
1. Switch off the instrument and remove the cable from the input terminal.
2. Lift the stand, press the tag of the battery compartment cover to open it (see Fig. 16).
3. Remove the batteries and replace them with new batteries of the same type (see §
7.2), respecting the indicated polarity.
4. Restore the battery compartment cover to its position.
5. Do not scatter old batteries into the environment. Use the relevant containers for
disposal.
6.3.
CLEANING THE INSTRUMENT
Use a soft and dry cloth to clean the instrument. Never use wet cloths, solvents, water, etc.
6.4.
END OF LIFE
WARNING
: the symbol on the instrument indicates that the appliance and its
accessories must be collected separately and correctly disposed of.
