HT PQA400 Скачать руководство пользователя

Страница: 17 / 144

PQA400 - PQA823 - PQA824

EN - 16

5.1.6. Auto power off setting
The meter permits to enable or disable the auto power off option in order to prevent a
quick discharge of internal battery. This feature, if selected, is active under each of the
following conditions:



No action was performed both any key or touch display for at least 5 minutes.



Meter does not supplied with external adapter.



Meter does not in recording running.

The effect is a long sound before turn off of meter.

1. Move the cursor using arrows keys on the field relative to “Auto power off”, marked with

blue background, see

Fig. 15: Auto power off setting screen

2. Use F3 or F4 keys (alternatively touch MOD(+) o MOD(-)) for enable “YES” or disable

“NO” auto power off.

3. Press SAVE or ENTER keys (or the smart icon

) to save the selected option and

confirm by “Ok”. This selected parameter will be present also after turning off the meter.

4. Press ESC key (or the smart icon ) to quit without saving any modification.

Shop for HT products online at:

1.877.766.5412

www.

PowerMeterStore

.com

Содержание PQA400

















































































































































Результаты поиска

Содержание PQA400

Отзывы:

Похожие инструкции для PQA400

Бренды по названию

Популярные бренды

HT PQA400, Руководство пользователя

Результаты поиска

Содержание PQA400

Отзывы:

Похожие инструкции для PQA400

Бренды по названию

Популярные бренды