HTA103
EN – 2
1. SAFETY PRECAUTIONS AND PROCEDURES
This instrument conforms to safety guidelines relating to electronic measuring instruments.
For your own safety and that of the apparatus, you must follow the procedures described
in this instruction manual and specially read all the notes preceded by the symbol
carefully. Strictly keep to the following instructions before and during measurements:
Do not perform measurements in environments with explosive gas, fuels or dust.
Do not perform any measurement in case of unusual conditions of the instrument such
as deformation, breakage, leakage of substances, absence of display reading etc.
The following symbols are used on the instrument and in this manual:
Caution: refer to the instructions reported on this manual; improper use may
damage the apparatus or its components.
Ground reference
1.1. PRELIMINARY
INSTRUCTIONS
Use the instrument only as specified in this manual otherwise, the protection provided
by the instrument may be impaired.
Only the accessories supplied with the instrument guarantee compliance with the
safety standards. They must be in good conditions and must be replaced, if necessary,
with identical models.
Do not effect measurements beyond the limits specified in this manual.
Check that batteries have been placed correctly.
1.2. DURING
USE
Carefully read the following recommendations and instructions:
CAUTION
No compliance with the Warnings and/or Instructions may damage the
apparatus and/or its components or injure the operator.
Use the instrument and the probes only within the ranges specified in this manual and
in the probes’ ones.
Do not perform any measurement on materials under voltage. This could damage the
instrument.
If during a measurement the read value or sign never changes, please verify if the
HOLD function is active.
1.3. AFTER
USE
When the measurements are completed switch off the instrument.
Remove batteries when the apparatus remains unused for long periods.