background image

 

 

HT3302

 

 

 

EN - 14

6. MAINTENANCE 

6.1. GENERAL 

INFORMATION 

1.  The instrument you purchased is a precision instrument. While using and storing the 

instrument, carefully observe the recommendations listed in this manual in order to 
prevent possible damage or danger during use. 

2. Do not use the instrument in environments with high humidity levels or high 

temperatures. Do not expose to direct sunlight. 

3.  Always switch off the instrument after use. In case the instrument is not to be used for 

a long time, remove the battery to avoid liquid leaks that could damage the instrument’s 
internal circuits. 

 

6.2. BATTERY 

REPLACEMENT 

When the display shows the symbol “

” and the message “Low”

,

 

 replace the batteries. 

 

 

CAUTION 

 

Only expert and trained technicians should perform this operation. Before 
removing batteries, disconnect all cables from input terminals. 

 
1.  Loosen the screw fastening the battery cover (see Fig. 2 – part 4) and open the 

compartment. 

2.  Remove the flat batteries, insert new batteries of the same type (see §) and close the 

cover of the battery compartment. 

3. Do not scatter old batteries into the environment. Use the relevant containers for 

disposal. 

 

6.3. 

CLEANING THE INSTRUMENT 

Use a soft and dry cloth to clean the instrument. Never use wet cloths, solvents, water, etc. 
 

6.4. 

END OF LIFE 

 

CAUTION

: the symbol indicates that the appliance, the battery and its 

accessories must be collected separately and correctly disposed of. 

 

 

 

Содержание HT3302





















Отзывы: