Copyright
©
2010, HT OMEGA, Inc. All Right Reserved.
http://www.htomega.com
16
HTO eClaro User Manual Rev. 1.1
Dolby Digital Live
--- Audio data will be encoded to AC-3 5.1 format and output
via S/PDIF out
DTS Interactive
--- Audio data will be encoded to DTS cinema 5.1 bit stream
format and output via S/PDIF out
Digtal Audio 44.1 KHz
---S/PDIF out with 44.1KHz sample rate
Digtal Audio 48 KHz
---S/PDIF out with 48KHz sample rate
Digtal Audio 96 KHz
---S/PDIF out with 96KHz sample rate
Digtal Audio 192 KHz
---S/PDIF out with 192KHz sample rate
NOTE: When Dolby Digital Live or DTS Interactive is enabled the analog outputs
will be turned off automatically to prevent interference.
NOTE: Windows VISTA and Windows7 driver provides S/PDIF Output mode
separately. You can choose PCM, Dolby Digital Live, DTS:Interactive on
S/PDIF Output.
(3)
DSP Mode
This button switches the DSP vision function on or off. When DSP mode us turned on
the visual function menu will be displayed. When DSP is off, the standard speaker
mode will be displayed.
There are a total 5 selectable DSP modes.
C-Media 7.1 Virtual Speaker Shifter
/
Dolby ProLogic IIx
/
Dolby Headphone
(only exist when Headphone on speaker
mode setup) /
Dolby Virtual Speaker
(only exist when 2CH on speaker mode)/
DTS
NEO:PC
(exclusive with Dolby ProLogic IIx).
C-Media 7.1Virtual
Speaker shifter
Dolby ProLogic IIx
Dolby Headphone
Dolby Virtual Speaker
DTS NEO:PC
NOTE: Dolby Headphone will be shown at Headphone Mode of Analog Output under
Windows VISTA and Windows7.
