PQA819 - PQA820
EN – 12
5.7. SETTING A PROGRAMMED START AND STOP
Through these parameters it is possible to set the start/stop modes of a recording. In
detail:
START:MAN
Recording of all selected quantities will be started at the beginning of
the first minute after the START/STOP key has been pressed by the
operator (see § 7).
STOP:MAN
Recording of all selected quantities will be manually stopped by the
operator by pressing the START/STOP key (see § 7.3).
START:AUTO
STOP:AUTO
Recording of all selected quantities will be started/stopped at the set
date and time. To start recording, the operator will have to press
the START/STOP key to set the instrument to Stand-By waiting for
the set start date to be reached (see § 7).
For further information on the settings of this parameter, please refer to the on-line guide
of the management software.
5.8. SETTING THE INSTRUMENT'S DATE AND TIME
It is possible to set the instrument's date and time by sending to it the date and time of the
device on which the management software has been installed.
For further information on the settings of this parameter, please refer to the on-line guide
of the management software.
