HSTC PLD, Руководство пользователя

Страница: 11 / 20

PLD User Guide
11
7.
You can enter any of the following commands from the drop-down menu:
(VER) – Print FW Version Displays the version of firmware/hardware in
use on the PLD
(INP) – Print Init info (including IMSI, IMEI) Displays initialization details, such as IMSI
number, IMEI number, primary Dispatcher IP
address, secondary Dispatcher IP address and
default Dispatcher
(GPS0) – Stop printing the Gps Message to screen Terminates display of GPS status
(GPS1) – Restart printing Gps message to screen Restarts display of GPS status
(DSP1) – Use primary dispatcher Allows you to select primary MX Dispatcher.
The MX Dispatcher is used to establish
communication with Command & Control.
(DSP2) – Use secondary dispatcher Allows you to select secondary MX Dispatcher
(DSPx1:xxx.xxx.xxx.xxx) – Set primary dispatcher IP
Address Allows you to set the IP address for the primary
MX Dispatcher
(DSPx2:xxx.xxx.xxx.xxx) – Set secondary dispatcher
IP Address Allows you to set the IP address for the
secondary MX Dispatcher
(DSPp1:xxxx) – Set primary dispatcher IP port Allows you to set the IP port for the primary MX
Dispatcher
(DSPp2:xxxx) – Set secondary dispatcher IP port Allows you to set the IP port for the secondary
MX Dispatcher
(GPS_SW) – Get Gps SW version Displays the version of GPS software in use on
the PLD, which could be used for diagnostic
purposes
(PNR) – Print Phone Numbers Displays complete list of stored phone
numbers to be used for voice calls, as
described in Section 6 “Making Voice Calls”
(PN0) – Set phone number 0 - 9 Allows you to store up to 10 phone numbers to
be used for voice calls, as described in Section
6 “Making Voice Calls”
Table 1. List of Troubleshooting and Configuration Commands