hsr-benelli S-series Скачать руководство пользователя страница 60

Страница: 60 / 108

HSR-BENELLI SERIES-S Manual | EN -

3.11 Turning

Turning the Series-S requires two simultaneous actions:

turning the steering, and

accelerating

To make a left-hand turn, move the steering to the left.

To make a right-hand turn, move the steering to the right.

It is only through acceleration that the necessary pressure will build up for changing the

direction. The stronger the pressure at the jet nozzle, the stronger the turn.

To make wide turns, a low jet nozzle pressure is required.

If you let the throttle lever go, there will be hardly any drive pressure.

Only reduced controllability is possible.

•

When you release the throttle lever completely, the Series-S will lose its controllability.

This can lead to hitting objects. Therefore, only release the throttle lever as much

as to keep enough pressure for steering.

Warning

Содержание S-series













































































































Результаты поиска

Содержание S-series

Отзывы:

Похожие инструкции для S-series

Бренды по названию

Популярные бренды

hsr-benelli S-series, Руководство пользователя

Результаты поиска

Содержание S-series

Отзывы:

Похожие инструкции для S-series

Бренды по названию

Популярные бренды