HSP NTG-3000, Руководство по эксплуатации

Страница: 9 / 18

HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de
NTG-3000 Operating Instructions Version 2.11
Page 9 of 18
9 LEDs
LED Description Color
POWER Lit when operating voltage is present Green
STATUS To indicate operation and errors (see 15.1) Green
ERROR To indicate error conditions (see 15.1) Red
Ethernet Link/Activity Not lit No link Yellow
Lit Link
Flashing Activity / network traffic
Ethernet Speed Not lit 10Base-T Green
Lit 100Base-TX
10 Startup
The device must be configured as described in Section 8 prior to startup. The supply voltage
can then be connected. Once the initialization phase is complete, cyclic measured value
acquisition starts automatically and, if an Ethernet link is available, the transducer starts to
send a continuous stream of measured values to the permanently programmed target IP
address (see Section 14.1).
At the same time, the values can be queried via the PROFIBUS interface (see Section 14.2).