HSP C25P, Инструкция по монтажу, Страница: 5 / 16

Hinge mounts:
Align the hinge mounts along front of tray, ensuring the hinges are properly positioned from centre of tub
460mm
to
centre of hinge mount either side along the inside of the front of tub. Attach the hinges using self-drilling screws
(supplied) through holes pre-drilled into the hinges. Apply clear or black silicone to any gaps and between the hing-
es and the vehicle to prevent water entry.
460mm
460mm
Measure and mark the positions as indicated above from the centre of the bed for placement of the bottom hinges.
WARNING: RECHECK DIMENSIONS TO ENSURE CORRECT MEASURENT
Drive the self-tapping screws through the holes in the top and the base of the hinge plate into the tub. Tighten to
3Nm.
Gas Struts:
Measure from the front rail inside of tub, measure along top edge of tray
11
30
mm
(windscreen end) then
down
20mm
and mark the screws position for the gas strut bracket. Position the gas strut bracket accordingly,
mark two mounting holes and centre.
Refer to Fig. 1 and Fig. 2
11
30
mm
Fig.1 - Gas strut bracket location
20 mm
Fig.2 - Gas strut bracket location
1177
19
C25P Page 5 of 16