HSM securio P36, Руководство по эксплуатации

Страница: 18 / 180

18
SECURIO P 36
12/2014
english
9 Technical data
Cutting type Strip cut Cross cut
Cut size (mm) 5.8 3.9 4.5 x 30 1.9 x 15 0.78 x 11 1 x 5
Security level DIN 66399 P-2 / O-2
T-2 / E-2
P-2 / O-2
T-2 / E-2
P-4 / O-3
T-4 / E-3
F-1
P-5 / O-4
T-5 / E-4
F-2
P-6 / F-3 P-7 / F-3
Cutting capacity* (sheets), A4 70 g/m
2
80 g/m 2
47 - 49
39 - 41
37 - 39
31 - 33
29 - 31
25 - 27
18 - 20
15 - 17
11 - 12
10 - 11
9
7
Weight 64 kg 68 kg
Cutting speed 90 mm/s 100 mm/s
Intake width 330 mm
Power supply 230 V, 50 Hz
Power consumption with max. number of
sheets
1.800 W
Energy consumption in standby mode < 2 Wh
Operating mode Continuous operation
Dimensions W x D x H (mm) 580 x 550 x 936
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
Volume of the shredded paper container 145 l
Sound pressure level emissions
(Idle running/ load)
58 - 59 dB(A) / 60 - 61 dB(A)
A-weighted sound power level (LWAd in
idle mode)
70.1 dB
Cutting size of the separate CD cutting
unit (optional)
Order C, E ** Order M, N **
4 x 7 mm 2 x 2 mm
Security level of the CD cutting unit O-4 / T-5 / E-4 O-6 / T-6 / E-5
** Identi fi ed by the letter after the 7-digit order number on the name plate on the back of the machine.
e.g. 1873111C >> cutting size 4 x 7 mm
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one speci fi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
This document shredder meets the applicable harmonisa on legisla on of the European Union:
• Low Voltage direc ve 2006/95/EU
• EMC direc ve 2004/108/EU
• RoHS direc ve 2011/65/EU
The EU declara on of conformity can be requested from the manufacturer.