14
HSM Pure 630
11/2015
english
6 Troubleshooting
Note:
The safety element is fi tted with contact protection. The document shredder switches off if you
press the safety element during the shredding process.
Display
Problem
Measure
Continu-
ous lamp
Paper jam You have fed in too much paper.
The cutting unit runs in reverse for a few seconds and pushes the
paper back out again.
• If necessary, press the reverse button “R” to remove the stack of paper.
• Take half the stack of paper.
• Feed the paper in portions.
Overload
• The motor was overloaded. Let the shredder cool down for approx.
15 - 20 mins. before using it again.
Flashing
light
General
fault dis-
plays
• A fault has occurred while shedding paper.
Pull the paper out of the slot to clear the light barrier.
Shredded
material
container
full
• Empty the shredded material container.
Note:
If you press the reverse button briefl y before removing the container,
part of the material is pulled back into the cutting apparatus and does
not fall inside the document shredder.
Door
open
• Close the front door.
Safety
element
pressed
• Do not press the safety element.
http://www.monomachines.com/
http://www.monomachines.com/