HSM Profi Pack 400, Руководство по эксплуатации

Страница: 6 / 48

6
Profi Pack 400
10/2012
english
• To remove material when there is a fault,
press rocker switch

.

Cutting unit moves backwards.
For all other malfunctions, check whether the motor was
overloaded before contacting our customer service. Let
the device cool down for approx. 15 – 20 mins. before
using it again.
T
5 Fault elimination
Switching on
• Press rocker switch

.

Cutting unit starts.
Feeding cardboard boxes
S
4 Operation
• Cardboard boxes are processed up to a width of 415 mm.
• Wider cardboard is automatically cut.
Switching off
• Tap rocker switch

.

Switch returns to ze ro po si ti on.

Cutting unit stops.
T
Switch off the shredder and pull out the mains plug.
When cleaning only use a soft cloth and a mild soap-
water solution. However, no water must enter the equip-
ment.
6 Cleaning
7 Technical data
Grid dimension 6 x 60 mm
Cutting capacity 1 layer
Working speed 8 m/min
Loading width 415 mm
Inlet height 10 mm
Voltage 230 V, 50 Hz
Motor power max. 1 kW
Noise level (idle/ load) 66 - 68 dB(A)
66 - 67 dB(A)
Dimensions W x D x H (mm) 590 x 370 x 360
Weight 37 kg
EC Declaration of Conformity
The manufacturer HSM GmbH + Co. KG, Austraße 1 - 9,
D-88699 Frickingen hereby declares that the machine,
referred to here as
HSM Pro
fi Pack 400
corresponds to the health and safety requirements of the
following EC directives listed below due to its conception
and design of the version in which it was put into circula-
tion by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical speci
fi cations:
• EN 13857:2008
• EN 55014-1:2006
• EN 55014-2:1997 + A1:2001
• EN 61000-3-2:2006
• EN 61000-3-3:2008
Frickingen, 01.03.2010
Rolf Gasteier - Technical Manager
415 mm

8 Disposal / Recycling
Electrical and electronic old devices contain
a variety of valuable materials, but also
hazardous substances which were required
for function and safety. Incorrect disposal or
handling can be dangerous to your health
and the environment. Never dispose of old
devices in the household waste. Observe the
current applicable regulations and use the collection
points for returning and recycling electric and electronic
devices. Dispose of all the packaging materials also in an
environmentally-responsible way.