HSM FA 490.1, Руководство по эксплуатации

Страница: 6 / 20

6
0912
FA 490.1
5 Transportation, installation
• During transport, observe the high centre of gravity of
the paper shredder!
• Place the pallet with the shredder in its packaging on
a smooth, level surface.
• Observe the instructions for unpacking.
• If you need to move the shredder through narrow
doors, you can wait until it is at its fi nal location before
fi tting the loading tray. Without the tray, the machine is
only 880 mm wide.
• The shredder may only be placed in dry rooms on a
hard, level fl oor – not on carpets. The fl oor load on
each roller is approximately 150 kg.
• The machine must be connected to a power source
which meets the speci fi cations on the nameplate.
Make sure the power cable is unobstructed and that
nobody can tread on it.
Mount the loading table onto the unit:
• Remove screws (1) and (2) from the frame.
• Fasten the supports to the frame with the screws (2).
• Place the table on the supports. Make sure the oil
hose is not bent. Fasten the table above (1) to the
frame.
• Screw the table on with the hexagon bolts (1) also at
the bottom of the frame and fasten to the supports
with the bolts (3) and nuts (4).
Mount the oil hose onto the unit (only cross
cut machines):
• Guide the hose through the recesses in the table to
the oiler and shorten the hose.
2
1
2 2
1 1 3, 4
1