14
Classic 386.2
09/2011
english
10 Technical data
Applied standards and technical speci
fi
cations:
• EN 55014-1:2006
• EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 55014-2:1997 + A1:2001 + A2:2008
• EN 61000-4-4:2004
• EN 61000-3-2:2006
• EN 61000-4-5:2006
• EN 61000-3-3:1995 + A1:2001 + A2:2005
• EN 61000-4-6:2007
• EN 13849-1:2008
• EN 61000-4-11:2004
• EN 62233:2008
• EN 60950-1:2006 +A11:2009
EC Declaration of Conformity
The manufacturer
HSM GmbH + Co. KG
, Austraße 1 - 9, D-88699 Frickingen hereby declares that the machine,
referred to here as
document shredder
HSM Classic 386.2
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Frickingen, 01.03.2010
Rolf
Gasteier
-
Technical
Director
The machine type was tested for compliance with the requirements of the EC directives by:
TÜV Rheinland Product Safety GmbH, Am Grauen Stein, 51105 Köln/Germany
This test centre is responsible according to the EC directives.
Cutting type
Strip cut
Cross cut
Shred size (
mm)
3.9
3.9 x 30
1.9 x 15
Sa fe ty ra ting German
DIN 32757 – 1
2
3
4
Cutting ca pa ci ty*
(Sheet), DIN A4
70 g/m
2
80
g/m
2
22 - 23
17 - 18
14 - 16
11 - 13
12 - 14
9 - 11
Cutting speed
120 mm/s
135 mm/s
130 mm/s
Weight
33 kg
35 kg
Noise level
(Idle running/ load)
60 dB(A) / 64 dB(A)
62 dB(A) / 64 - 70 dB(A)
Lo ading width
386 mm
Voltage
230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
Power for the maximum number of sheets
670 W
Operating mode
Continuous operation
Dimensions
W x D x H (mm)
548 x 412 x 860
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
-10 °C to +40 °C
max. 90 %, without condensation
max. 2,000 m
Volume of shredded material bag
116 l
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one speci
fi
ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
The performance data in 80 g/m² is calculated.
Содержание 386.2
Страница 69: ...09 2011 Classic 386 2 69 Classic 386 2 ...
Страница 70: ...70 Classic 386 2 09 2011 Classic 386 2 ...
Страница 71: ...09 2011 Classic 386 2 71 Classic 386 2 ...