HSGM
Heißschneide-Geräte
u.- Maschinen GmbH
HSGM GmbH
Phone : +49 (0) 6123 9978-0
B-03-VW-D.DOC
In der Rehbach 13
Fax : +49 (0) 6123 9978-40
Status: 28.01.2017
D-65396 Walluf
Email: [email protected]
Printed: 16.05.2018
http://www.hsgm.com
Page: 6
Operation
Never operate your heat cutting machine when it has just been moved from a cold room into a warm room.
The
condensation that occurs may under unfavourable circumstances damage your heat cutting machine.
Leave your heating cutting machine turned off and allow it to reach room temperature.
Maintenance and Cleaning
Regularly inspect the technical safety of your heat cutting machine, e.g. for damage to the power cord or the housing.
If it is to be assumed that safe operation is no longer possible, the machine must be taken out of use and secured to prevent
inadvertent use. Pull the plug out of the socket!
It may be assumed that safe operation is no longer possible in the following circumstances:
If the machine shows signs of damage;
If the machine no longer works;
After prolonged storage in unfavourable conditions; or
After rough handling during transport.
To clean the machine, it is sufficient to wipe any dust or other dirt off using a dry cloth and/or a soft brush.
Eliminating faults
With this heat cutting machine, you have bought a state of the art product that is safe to operate.
Problems or faults may nevertheless arise.
Therefore we would like to describe here how you can eliminate possible faults:
It is essential to observe the
safety instructions!
Problem
Solution
No function
- The on/off switch has not been pressed
- The power plug has not been plugged in
- Check the socket
- The cutting blade has not been clamped tight
- The installed fuse has blown
Repairs may only be conducted by the manufacturer or its customer service.
Warning!
The machine must be disconnected from the power supply during maintenance and when replacing
parts. This is done by pulling out the plug.
The operator must be able to check that the plug is still disconnected from each point of access.
