HSGM HSG-3-VW, Руководство по эксплуатации

Страница: 5 / 8

HSGM
Heißschneide-Geräte
u.- Maschinen GmbH
HSGM GmbH
Phone : +49 (0) 6123 9978-0
B-03-VW-D.DOC
In der Rehbach 13 Fax : +49 (0) 6123 9978-40
Status: 28.01.2017
D-65396 Walluf
Email: info@hsgm.com
Printed: 16.05.2018
http://www.hsgm.com Page: 5
Cutting blade Temperature dial Cutting blade Temperature dial
For your own notes
HS0-N 2 _____ ___
R 4 _____ ___
F-2 5 _____ ___
F-3 4 _____ ___
V 5 _____ ___
HS-S 5 _____ ___
STA 5 _____ ___
VST 7 _____ ___
R-1 7 _____ ___
G-90 7 _____ ___
The work or cutting surface should be made of a smooth material that draws as little heat as possible away from the
blade, leaving all of the power for the cutting process.
Glass that is 4 – 6 mm thick is ideal.
When work has been completed, the blade holder may be placed on the support bracket. The switch lever returns
automatically to its end position.
The switch lever must not be mechanically locked in place or bridged electrically.
Air-cooled blade holder (Option –K)
The machine may optionally be fitted with an air-cooled blade holder. Cooling air is blown into the blade holder through an
air hose installed in the power cable. This cools the blade terminals for the cutting blade and the power cable situated
inside. This enables powerful cutting blades to be used over a longer period without thermal overload to the blade holder.
A connector for cooling air and a throttle valve to adjust the cooling output is mounted on the back of the machine. Turning
this anticlockwise increases cooling output, while turning it in a clockwise direction reduces the cooling output.
Extractor fan (Option -ASV-M in conjunction with vacuum pump -ASP )
The machine may optionally be fitted in the factory or subsequently with a model ASV extractor fan.
With this, you will receive the following accessories:
1) Model ASP vacuum pump, equipped ready for operation with a motor protection switch and a 3 m
power cord with 400V/16A CEE plug. The intake air is supplied filtered to the pump via a
VF-11/4B 1.53.2.003 intake filter incl. C112 2.53.2.0005 filter cartridge.
2) Vacuum suction hose with steel wire spiral, Art. No.: 4480.012 Ident. No.: 113910 Ø i= 12mm / a=18mm
To ensure perfect functioning, it is important to ensure that the suction mechanism is clear (not blocked), and to
clean it if necessary.
All parts specified here can also be subsequently operated with an existing machine.