04
Control Direction Tests
After binding a transmitter to the aircraft receiver
,
set the trims and
center the control surfaces
.
sub
-
trims to 0
,
then adjust the clevises to
Move the controls on the transmitter to make sure the aircraft control surfaces move in the proper direction
.
Assemble the aircraft and bind your transmitter to the receiver before performing this test
.
Transmitter
Command
Aircraft Reaction
Elevator
Up Elevator
Command
Down
Elevator
Command
Aileron
Stick Right
Stick Left
Rudder
Stick Right
Stick Left
Small
Big
the Throttle
