HSD CPH 400 B Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 74

background image

1 Preliminary information

12

HSD S.p.A. © - h0101k00a.fm091115

1.2

Symbols used in the manual

The parts of the text requiring special attention are highlighted and preceded by the symbols
illustrated and explained below.

Danger

Indicates a procedure, practice or similar action that could cause injury if not
respected or carried out correctly.

Caution

Indicates an operating procedure, practice or similar action that could damage or
completely destroy the product if not respected or carried out correctly.

Information
Highlights particularly important information of a general nature that must not be ignored.

1.3

Documents supplied with the product

The supplied documents must be stored in an appropriate location and must always be readily
available for consultation.

The following is a list of the documents supplied with the product (unless otherwise agreed with the
customer).



Assembly instructions

(this manual). It contains warnings and instructions for the transport,

installation, use, maintenance and disposal of the product.
Adobe

®

Reader

®

(www.adobe.com) is required to view the file.



Test report.

Contains the testing results performed on the unit.



EC Conformity Declaration.

This certifies that the product complies with the directives

indicated. It is only issued for machines sold in EEC and EFTA (European Free Trade
Association) countries.

Check that all the documents listed above are present on delivery of the product. If necessary,
further copies can be obtained on request from the manufacturer.



Any enclosures.

These contain additional information that completes and/or replaces the

information in the document with which they are enclosed.

«
...
10
11
12
13
14
...
»

Содержание CPH 400 B











































































Отзывы:

Нет отзывов

Похожие инструкции для CPH 400 B

Бренд: VeEX Страницы: 2

Бренд: JB-Lighting Страницы: 48

Бренд: ParaBody Страницы: 6

Бренд: Sailmon Страницы: 10

Бренд: B&W Tek Страницы: 12

Бренд: b&o Страницы: 46

PowerXL DX-NET-ETHERNET2-2

Бренд: Eaton Страницы: 48

Power Xpert C445

Бренд: Eaton Страницы: 2

Бренд: Olsen Страницы: 4

Dominator Series

Бренд: Falcon Страницы: 31

Бренд: Fakir Страницы: 22

Бренд: Haag-Streit Страницы: 18

Бренд: Haag-Streit Страницы: 20

Бренд: V-TEK Страницы: 2

Бренд: V-TEK Страницы: 112

Lab companion SI-300

Бренд: Jeio tech Страницы: 69

IP Video Test Option HST-3000

Бренд: JDS Uniphase Страницы: 4

Бренд: Jct Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды