HSB Gamma 120-ZSSD Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 22

HSB Gamma 120-ZSSD Скачать руководство пользователя страница 4

Safety

2

2018-06-11

FM 169 A&M Instr. for Gamma type Z..D Rev.01

distributed by

1

Safety

These Operating Instructions are an important part of the machine and
must always be kept within reach.
They must be passed on together with the machine to any third party.

It is important that you contact the manufacturer should there be any
part of these instructions that you do not clearly understand.

1.1

Symbols used

In these Operating Instructions, the following warning symbols and
other symbols are used:

Indicates immediate danger.
Failure to comply with this instruction may result in death or serious
injury.

Indicates a danger carrying a medium to high risk.
Failure to comply with this instruction may result in death or serious
injury.

Indicates a danger carrying low risk.
Failure to comply with this instruction may result in slight injury or
material damage.



Note
Includes tips for the operation and optimum use of the machine.

1.2

Intended use

The linear unit is solely intended for the purpose of manipulating,
positioning, transporting, palletising, loading, unloading, clamping,
synchronising, tensioning, testing, measuring, handling and pressing
of component parts or tools.

Please take note of the principal fields of application of the linear unit
(see Section 4 and Section 3).

In order to guarantee compliance with the law concerning the
electromagnetic compatibility of devices (EMC directive), the linear unit
may only be used for industrial applications (in accordance with
EN 61000-6-1).

Utilisation of the machine for any other purpose would constitute
inappropriate use. The manufacturer accepts no liability for any
damages resulting from such use. The risk is borne solely by the user.

«
...
2
3
4
5
6
...
»

Содержание Gamma 120-ZSSD























Отзывы:

Нет отзывов