Touch IPC Technical Manual
Page 6
Customizing the TIPC
There are a number of settings you may change according to how your customer will work. The
typical settings are described below.
Rotate the screen
The monitor driver allows the screen to be rotated. By default, 0 degrees is “connectors UP” while
180 degrees is “connectors DOWN”.
In the lower right part of the screen
there is a yellow icon with the text
”S3”.
Click on this icon with the mouse.
Then select ”Rotation” and the way
you wish to rotate the screen.
You will be asked to calibrate the
screen (simply point to a dot) to
change mouse orientation also.
Calibrate the touch interface
Should the touch interface become inaccurate, you can carry out a manual recalibration. Usually a
“standard” calibration is enough.
Click on the icon ”PM” in the lower
right corner and choose ”Control
Panel”.
Select tab for ”Calibrate” and click
”Standard Calibration”.
Click on the red dots as requested.
It is recommended to use a stylus
during this process, for improved
accuracy.
In the same menu, there are a number of settings / features related to the touch interface. They will
not be described here, but are quite self-explanatory.