- 19 -
6.3
Process controls
• Select the
Process controls
tab
•
Select
tool type
•
Program no.:
Select program with which the tool should work. To start a process, „101“
must be selected for the PowerRiv and NutBee series riveting tools. For screwdriving tools
of the TorqBee series, the number of the desired se 1000 must be selected e.g. if
process number 3 is to be released, „1003“ must be entered.
•
Count:
Number of screw connection/rivets per release
•
ID:
Entry mandatory (e.g. „1“), entry as customized text, max. 64 characters, no special
characters like semicolon or space.
•
TorqBee release mode:
0 = never, 1 = only after NOK, 2 = after OK/NOK, 4 = released up to 1st OK
NutBee release mode:
0 = never
•
Failed attempts max.:
customized entry of the max. permitted repeat attempts
•
NOK behavior:
0 = NOK results in immediate stop, 1 = 1 x NOK results in NOK, 2 = screw NOK
→
NOK screws
does not result in total NOK within the attempts, 3=never NOK
