Lift the panel out of the crate by lifting vertically at each end (see Photo 2). Move
the panel and packing material directly to your damage free work surface. Once
at the work surface, remove and save the two fitted foam end support cushions.
Then open the protective paper covering the panel to expose the unit for
assembly. Saving all the packing material is critical to secure transportation of
the frame in the future. Shipping or moving the panel by any other means may
expose the unit to permanent damage.
Installation of Adjustable Foot System
- Unwrap two of the four feet supplied
with the unit. Remove the screw and washer from each of the feet (see Photo 3).
Photo 3
Hands tighten the nut all the way down on each individual foot. Then back the
nut off one half rotation (see Photo 4).
Photo 4
Place the supplied washer on top of the nut and then screw each of the feet into
the threaded inserts on the bottom of the first vertical panel (see Photo 5 & 6).
The feet should be threaded into the insert until the washer/nut come in contact
with the vertical panel threaded insert. (This ensures maximum engagement
between the insert and the foot). Repeat this procedure and install the second foot
to the bottom of the first vertical panel.
Photo 5 Photo 6
