HIROSE ELECTRIC CO.,LTD.
ETAD-H0814-00
2
2 / 6
FORM HC0011-9-2
3. Steps for harnessing
3.1. Cable stripping
Strip cables in accordance with Crimping Quality Standards (ATAD-H0810/0811).
In so doing, make sure there is no scratch on cable cores.
3.2. Crimping
Crimped terminals to cables using an applicator (AP105-DF63-1618-*), and check the crimping
height and shape in accordance with the Table of crimping conditions and Crimping Quality
Standards (ETAD-H0810/0811).
3.3. Insertion to crimping terminal sockets
Hold the cable of a crimped terminal, and insert it to each terminal hole of crimping sockets.
(Insert the terminal in the direction of arrows below.)
*The figures show insertion to DF63W-4EP-3.96C and DF63W-4S-3.96C.
For insertion, place the crimped terminal and crimping socket lock in the following direction:
Before inserting terminal
After inserting terminal
Lanse holder
Lanse holder
Socket
Socket terminal
Plug terminal
In-line Plug
Lock :Upper
Lock :Upper
Contact No.
Contact No.
Lanse holder:
Lower
Lanse holder:
Lower
Direction of insertion
Jun.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
