Care for the main unit and blood pressure monitor cuff
Care and maintenance
18/25
Maintenance
Store the unit in a clean and dry
location.
Do not subject the unit to extreme
hot or cold temperature,humidity
and direct sunlight.
※
Thinner
Naphtha
Gasoline
Keep the unit in the storage case when
no use.
Clean the unit with soft dry cloth.
Do not use any abrasive or volatile
cleaners.
Never immerse the unit or any
component in water.
,
.
.
.
Make sure the monitor is off prior to cleaning
a mixture of distilled
water and 10 percent bleach could be used
Using a spray bottle, moisten a soft cloth towel with the bleach or
detergent mix until it is fully saturated. Squeeze any excess moisture
from the cloth to avoid any dripping or potential oversaturation of the
cuff.
Wipe all surfaces of the blood pressure monitor cuff thoroughly,
making sure to clean the inside and outside of the cuff
Be cautious
not to get any moisture in the main unit
Using a dry cloth, gently wipe away any excess moisture that may
remain on the blood pressure cuff. Lay the cuff flat in an unrolled
position and allow the cuff to air dry.
We won't be responsible for any quality problem if you don't care and
maintain the product as instructed.
Remove the batteries if the unit will
not be used in 3 months or longer.
Do not clean the body and cuff with
naphtha,thinner or gasoline etc.
Do not wet the cuff or attempt to
clean the cuff with water.
←