HRC PGM-FI, Руководство пользователя

Страница: 18 / 27

15
PGM-FI Setting
Troubleshooting
No. State Cause Action to take
1 Unable to install *refer to 1
Please contact HRC service.
2.
3. *refer to 2
4. *see 3
*1: CD-ROM drive
If you click on the My
Computer icon, a win-
dow like left will
appear.
Click CD-ROM drive in
the window and
installation will start.
If there is not CD-ROM
icon displayed in the
window, your PC
might not be
equipped with CD-
ROM drive or is not
recognizing one.
Consult instruction
manual of your PC to
confirm this.
*2: How to check serial port
Click “View system
information” in the
System Tasks.
Don’t know how
to operate
CD-ROM drive is
not recognize
Make the drive recognized and
try installation again
Defect of CD-ROM
(deep scratch,
etc.)
Unsupported OS
This tool runs on windows
98/Me/2000/XP.
Unable to com-
municate with
ECU The serial port
setting incorrect
Power supply of
ECU is turned off.
Communication
cable connection
is defective
Timing of trans-
mission is not
proper
Communication cable connec-
tion is defective.
Check connection (Refer to
the page on connection with
the vehicle)
Press return key within two
seconds after turning OFF and
ON the main switch to trans-
mit data (Refer to the page on
data transmission)
Data read out
from ECU cannot
be transmitted.
The retrieved data cannot be
retransmitted as it is.
In order to transmit retrieved
data, you should save it once.
(Refer to the page on data
reception)
Default file is not
displayed when
starting up first A same problem
is occurs with
the English ver-
sion.
Unable run the
tool
Check power supply