Phone Controls:
To answer a call – Short the MFB once.
Auto receive call – Depending on the phone, the unit will automatically answer the call after 8-
16 seconds of ringing.
To reject a call – Press the MFB and hold until you hear a “BEEP” (~ 2 seconds).
To end a call – While the call is active, press the MFB once.
Last number redial – In standby mode, press and hold the MFB for 2 seconds until you hear a
“BEEP”.
To go to a phone call, press and hold the MFB for 2 seconds until you hear a “BEEP”.
NOTE:
Depending on your cell phone model, some of these functions may not work as
described above.
Music Controls:
Play / Pause – Press the MFB button once
Next Track – Turn the MFB button Clockwise, and let go
Previous Track – Turn the MFB button Anti-Clockwise, and let go
To Adjust the Volume:
Turn and Hold the MFB button Clockwise to increase, and Anti-Clockwise to decrease.
NOTE:
Depending on your cell phone model, some of these functions may not work as described
above.
To Pairing with a Bluetooth Enabled GPS Devices:
1. To pair the Bluetooth headset with the GPS, place them within a 3 feet distance from each
other.
2. Press and hold the Headset’s Power button for 8 seconds or more to enter pairing mode
(red and blue lights flashing alternately).
3. Open the GPS, in the "Settings" screen, click "BLUETOOTH", then click "RESEACH", start
searching for Bluetooth devices.
4. About 10 seconds you can search for "T-COM"
5. Click the "T-COM" will appear on the display as "Headset" icon, then click the icon.
6. The Bluetooth headset paired with the GPS device automatically, in 2 to 3 seconds the
connection is successful.
7. When the pairing successful, the red and blue lights flashing alternately to quit flashing blue
light. The Headset will beep if pairing is successful.
8. When Headset and GPS is paired, you should be able to play music or GPS navigation.
8. To disconnect your GPS from the Headset, click "Disconnect" button on your GPS’s
Bluetooth interface.
