
LED
Status
Description
AC power supply
Red LED glows
Power
LED off
Power off
Red LED glows
Repeater Disable
Red LED flashes
Self- checking mode
Disable
LED off
Normal working mode
Digital
Green LED glows
Digital mode
Analog
Green LED glows
Analog mode
Red LED glows
Transmitting (analog)
Red LED glows
The repeater in slot A is transmitting (digital).
Green LED glows
Receiving (analog)
Green LED
glows
The repeater in slot A is receiving (digital).
Red LED glows
The repeater in slot B is transmitting (digital).
Green LED glows
The repeater in slot B is receiving (digital).
LED Indicators
Repeater Overview
NO.
Item
Description
1
Tx Connector
N Type (Roll Pass)
2
Ground Screw
Must be connected to system grounding.
3
Main Fan
Change speed. Stops at room temperature.
Rotation speed increases when repeater
works for a long time.
4
Ethernet Connector
100Base-TX (RJ45)
Rear Accessory Connector
For plugging programming cable.
Rx Connector
BNC (Roll Pass)
Power Fan
Continuously working to cool the repeater.
8
Backup Battery Connector
(DC Input)
Backup battery is an optional accessory and
provides backup power for the repeater. It
can be charged slowly by the repeater, but it
is recommended to be charged with an
external charger after it is in use for a long
time. Standard repeater power supply can
automatically toggle from AC power to
battery power when AC power supply is cut
off, and automatically switch to AC power
when the AC power supply recovers. Front
panel power LED turns red from green when
battery power supply is connected.
9
Main Power Supply
Connector (AC Input)
100 – 240V
10
Power On/Off Switch
Switch on or off the AC power supply to the
repeater.
Front Panel
5
6
7
Rear Panel
11
12
Tx A
Rx A
Tx B
Rx B