F
C
C
C
a
u
tio
n
01
02
C
o
n
te
n
ts
C
o
n
te
n
ts
04
04
04
04
06
06
06
07
03
Front Panel
Rear Panel
Status Indicators
LCD Icons
LED Indicator
Programmable Keys
Basic Operations
11
Adjusting the Volume
11
Selecting a Zone
11
Selecting a Channel
11
Analog/Digital Switch
11
Private Call
11
Group Call
12
13
All Call
13
Making a Call on Analog Channels
13
Menu Navigation
13
Contact
14
Message
15
Call Logs
15
Scan
Zone
16
Settings
16
Accessories
18
Functions and Operations
19
Home Screen
19
Monitor
19
Squelch Off
19
20
Digital Emergency
20
Busy Channel Lockout
21
Invalid Channel Indication
21
Squelch
21
Optional Accessories
Troubleshooting
Care and Cleaning
Service and Support
07
08
09
Contents
Product Inspection
Installation
Instructions
Installation Tools
Installation Steps
Radio Overview
20
Time-out Timer (TOT)
Turning the Radio On/Off
11
Talk Around
19
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Your radio radiates measurable RF
energy only while it is transmitting(during talking), not when it is receiving(listening)or in standby mode. Antenna gain must
not exceed
3.
5
dBi.The antenna installation comply with the requirements of manufacturer or supplier, and at least 3.8m from
any body part of the user or nearby persons.
Your
2-way radio is designed and tested to comply with a number
of national and international standards and guidelines (listed below) for human exposure to radio frequency
electromagnetic. This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF
exposure environment at operating duty factors of up to 50% transmitting and is authorized by the FCC for occupational use
only. In terms of measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in
standby mode.
Note: The approved batteries supplied with this radio are rated for a 5-5-90 duty factor (5% talk -5% listen -90% standby)
even though this radio complies with the FCC occupational RF exposure limits and may operate at duty factors of
up to 50% talk.
Your Shenzhen HQT Science & Technology CO.,LTD. Two-way radio complies with the following RF energy exposure
standards and guidelines:
United States Federal Communications Commission, Code of Federal Regulations; 47CFR
§§1.1.307,1.1310,
Shenzhen HQT Science & Technology CO.,LTD.
FCC Caution
•
2.1091 and 2.1093
American National Standards Institute(ANSI)/ Institute of Electrical and Electronic Engineers (IEEE) C95.1-1992
Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
•
•
Warning! : This radio generates RF electromagnetic energy during transmit mode. This radio is
designed for and classified as “Occupational Use Only,” meaning it must be used only during the
course of employment by individuals aware of the hazards and the ways to minimize such hazards.
This radio is NOT intended for use by the “General Population” in an uncontrolled environment.
RF Specification
：
Frequency range
：
400-470MHz
RF output power
：
High power 50W / Low power 25W
Modulation Type
：
Analog
：
FM / Digital
：
4FSK
Channel Separation
：
12.5kHz
22
23
24
F
C
C
C
a
u
tio
n
