- 6 -
- 7 -
φ 10
φ 5
Step 1
Find a cool, dry and weather
safe location for installation.
Step 3
Drill holes in the marked
mountiong hole location.
Step 5
Fasten the controller into the
pilot screws.
Step 6
Continue to wire battery. solar DC
load and other accessories to the
controller
Step 4
Insert pilot screws in the mounting
holes.
Step 2
Mark the controller's mounting
holes on the mounting surface.
Temperature Sensor
Connect the positive battery wire followed by the negative battery wire.
1.
Make sure your solar panels are fully covered to prevent electrical shock.
2.
Connect DC load wires to the DC load output (if applicable).
4.
Connect the external temperature sensor to its terminal shown above, and
attach or stick the temperature sensor to the battery side.
5.
Connect the positive solar array output wire followed by the negative solar
array output wire.
3.
Download APP ChargePro and turn on the BT function in the mobile
phone. Testing the APP function with the controller.
6.
MOUNTING INSTRUCTION
WIRE CONNECTION SEQUENCE
During installation of the controller, please follow the order of connection
below:
