V i s i t
h t t p s : / / h q t e l e c o m . c o m
f o r l a t e s t d o c u m e n t a t i o n & s u p p o r t
P a g e
8
(4) Press ‘UP’ button again, the LCD display shows "CHECK MESSAGE"
(5) Press ‘OK/DIAL’ button, it will play the recorded voice message.
You can press the ‘UP’ button to show “DELETE” and then ‘OK/DIAL’ button to remove the current message.
5.9.3
Emergency call number(s) setting (required)
The
SOS Phone
supports auto dialing of up to ten (10) emergency/contact telephone numbers, including 911. Follow steps (1)
to (3) above, then:
(4) Press ‘UP’ button 2 times, the LCD display shows "EMERGENCY NUMBER"
(5) Press ‘OK/DIAL’ button 2 times to enter into entry mode (display will show a flashing cursor on the right)
(6) Use keypad on the base to type the number. Press ‘OK/DIAL’ to save it.
(7) Press the ‘DOWN’ button to add another emergency number.
(8) Press the ‘OK/DIAL’ button to enter into entry mode (display will show a flashing cursor on the lower right)
(9) Use keypad on the base to type the number, then press ‘OK/DIAL’ button to save it.
Repeat steps (7) – (9) to add up to 10 emergency numbers.
MODIFY NUMBERS: You can press the ‘UP/DOWN’ buttons to view stored number(s). Then Press ‘OK/DIAL’ button to modify
the stored number or press ‘DEL’ button to delete the stored number.
TIPS:
(1) Each stored number will show as CLIP 1, 2, 3, … 10. Please make sure that you are using CLIP 1, then 2, then 3 and so on
to store the numbers in the correct sequence.
(2) We recommend that you store all the emergency numbers BEFORE recording your EMERGENCY MESSAGE because this
device will attempt to re-record a message every time you go into the EMERGENCY CALL setup.
6
BOOK/ESC (Phonebook Setting)
6.1
Creating a new entry in the phonebook
(1) Press the ‘BOOK/ESC’ button,
(2) Press the ‘MENU’ button, the LCD display shows "STORE NUMBER"
(3) Press ‘OK/DIAL’ button, then input the number 0-9, *, #, P, then press ‘OK/DIAL’ button to save, and then input the name
using the keypad (2-9) to select letters A thru Z, then press ‘OK/DIAL’ to save.
TIP: When using the keypad to enter names, look for the letters below each number (2 thru 9) in the keypad. You will need to
press the key 2 or 3 times in order to display the desired letter. For example, to show ‘C”, you will need to press the ‘2’ key 2
times.
6.2
Editing a phonebook record
Press BOOK and then the ‘UP’ or ‘DOWN’ buttons to find the phone record that needs to be edited, then press ‘MENU’ button
for 3 seconds. The LCD display shows "EDIT?", press ‘OK/DIAL’ again, then enter into the number edition, after that then
press ‘OK/DIAL’ to confirm.
