HQ Power VDSCD3000, Руководство пользователя

Страница: 9 / 44

VDSCD3000 HQ POWER 9
•
PAUSING
Press the play / pause button to switch between play and pause.
•
CUEING
Cueing is the action of preparing for playback. When the cue button is pressed, playback returns to the cue
point and enters pause mode. When the play / pause button is pressed during the cue mode, playback starts.
Cue point setting:
o
Playback starts from pause (using the jog wheel to set the start point) or skip to a new track during play or
pause. The beginning play point will be set to the cue point.
o
Press the in/r. cue button during playback to set the new cue point (so-called “cue on the fly”). To return to
the cue point, press the cue button. This will return to point A or B above. The player has completed the
cue or pause operation and is waiting for the play start command. When the play / pause button is pressed,
playback starts.
•
AUTO CUE
When the disc is loaded, the cue point is set to the first source of music. If track is changed before pressing
play, the cue point is changed to the new starting point. Pausing during playback will also set the new cue
point.
•
FRAME SEARCH
This is done by first pausing then using the jog wheel to set the start point. Using the jog wheel allows you to
hear what is playing. Once you have set the start point, press play button and then cue button to mute.
•
SCANNING
Rotate the shuttle wheel forward or reverse. You will scan or reverse at 4 different speeds depending on how
much you rotate the wheel.
•
LOOP PLAY
You can create a seamless continuous loop between 2 points.
o
Press in/r. cue button to set loop start point A. The in/r. cue button LED will light up.
o
Press out/exit button to set loop end point B. You will know you are in a seamless loop mode because in/r.
cue and out/exit will light and flash. Sound will continue with no interruption.
o
To exit seamless loop press the out/exit button. LED will stay on but not flash. Music will resume normally.
To replay the loop, press the reloop button. In/r. cue and out/exit LED will all begin flashing again.
•
SLEEP MODE
The CD player automatically shuts off the laser after 15 minutes (when in pause or cue mode). This will
lengthen the life of the motor and laser. To restart the player, just press cue or play buttons.
•
TIME DISPLAY
During normal play, press time button to select time display mode.
o
Elapsed time
o
Remaining time in a selection
o
Total remaining time of the disc
•
PITCH BENDING
The speed increases or decreases respectively while the PITCH BEND + or PITCH BEND – button is pressed.
The extent increases depending on how long you hold the button. The pitch can be up to + 16% or – 16%.
During play mode, rotate jog wheel clockwise to increase the pitch bend or backwards to decrease the pitch
bend. The speed that you rotate the jog wheel determines the percentage of pitch bend.
•
MEMORY CUEING
Press the memory button to make the unit enter the cue memory mode (LED on) and press the desired 1 ~ 4
numeric button at the desired cue point to memorize. A new cue point will be set. The number on the display
will flash twice then light steadily to indicate the cue memory has been set.
•
RECALL CUE POINT
Press the memory button to make the unit enter cue recall mode (LED off) and make the direct access LED
turn off. Press the desired 1 ~ 4 numeric button to recall the desired cue memory point during playback or
pause mode. Accessing a stored cue point will cue that point and instantly start without any music interruption.
The last cue that was stored or recalled will flash in the LCD screen to let you know it was cued.