HQ Power VDP150MH6N, Руководство пользователя

Страница: 6 / 31

VDP150MH6N VELLEMAN 6
The control board allows you to assign the DMX address, which is defined as the first channel from which the device
will respond to the controller. Make sure not to overlap channels in order to control each
VDP150MH6N
correctly and
independently from any other fixture in the DMX chain. If you address two, three or more fixtures similarly, they will
work similarly. For addressing, press the MODE button until the display shows “d”. Set the desired address via the
UP and DOWN buttons.
After having addressed all the fixtures, you can start operating them via your lighting controller.
NOTES :
After switching on the fixture, the
VDP150MH6N
will automatically detect whether DMX512 data is received or not. If
the data is received, the control LED will flash. If there is no data received, the control LED lights permanently. This
situation can occur when:
- the 3-pin XLR plug (the cable with DMX signal form the controller) is not connected with the input of the
VDP150MH6N
- the controller is switched off or defective, when the cable or connector is defective or the signal wires have
been swapped in the input connector
It is necessary to insert the XLR
Ω
120 termination plug in the last fixture in the chain in order to ensure proper
transmission on the DMX data link.
c) DMX Values per Channel
Channel N° Description From To Function
1 Pan
2 Tilt
0 16 Open / white
17 33 Pink
34 0 Blue
51 67 Orange
68 84 Green
85 101 Violet
102 118 Yellow
119 135 Red
3 Colour Wheel
136 255 Rainbow effect with increased speed
0 4 No rotation
5 120 Forwards gobo rotation with increasing
speed
121 139 No rotation
4 Gobo Rotation
140 255 Backwards gobo rotation with
increased speed
0 13 Open
32 63 Gobo 1
64 95 Gobo 2
96 127 Gobo 3
128 159 Gobo 4
160 191 Gobo 5
192 223 Gobo 6
5
Rotating Gobo
Wheel
224 255 Gobo 7
0 2 Shutter closed
3 29 Dimmer control (shutter open)
30 250 Strobe effect with increasing speed
(max. 13 flashes/sec.)
6 Shutter, Dimmer
251 255 No function (shutter open)