HQSM10010
V. 03
–
28/10/2021
5
©Velleman Group nv
5.
Operation
Never run this device without fluid.
Disconnect from the mains before filling.
Only use fog fluid recommended by the manufacturer.
Never add flammable substances.
Never orientate the output nozzle directly in the direction of the audience.
1.
Fill the fluid tank with fog liquid. Do not overfill.
2.
Fill the ice tank with regular ice cubes.
3.
Switch on the device and wait for the machine to warm up.
4.
Press the button on the remote control to trigger the fog output. The device will
continue to output fog/bubbles as long as the button is pressed.
5.
Drain the water in regular intervals (ca. every 45 minutes).
6.
Switch off the device after use. Empty the tanks accordingly.
The output nozzle will heat up during operation. Do not touch the nozzle until it has
cooled down completely.
6.
Cleaning and Maintenance
Before starting any cleaning or maintenance activities:
1.
Unplug the device's power cord from the outlet.
2.
Let the device cool down.
Cleaning
•
Use normal glass cleaner and a soft cloth to wipe off the outside casing.
•
Always be sure to dry all parts completely before plugging the device back in.
•
Cleaning frequency depends on the environment in which the unit operates (i.e.
smoke, fog residue, dust, dew).
•
Do not immerse the device in any liquid.
Maintenance
•
All screws should be tightened and free of corrosion.
•
The housing, the lenses, the mounting supports and the installation location (e.g.
ceiling, suspension, trussing) should not be deformed, modified or tampered with;
e.g. do not drill extra holes in mounting supports, do not change the location of the
connections…
•
Mechanically moving parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified
technician maintain the device.
•
There are no user-serviceable parts, apart from the fuse and the lamp.
•
Refer to an authorized dealer for service and/or spare parts.
Fuse Replacement
1.
Unplug the device's power cord from the outlet.
2.
Let the device cool down.
3.
Open the fuse holder.
4.
Replace with an identical fuse.
5.
Insert the fuse holder back in its place, replace the rear cover and reconnect
power.
