HQ Power HQLE10002, Руководство пользователя

Страница: 8 / 55

HQLE10002
V. 01 – 18/10/2016 8 ©Velleman nv
7.4 DMX Mode
The DMX mode allows you to control the device with any universal DMX controller.

All DMX-controlled devices need a digital start address so that the correct device responds to the
signals. This digital start address is the channel number from which the device starts to “listen” to
the DMX controller. The same starting address can be used for a whole group of devices or an
individual address can be set for every device.

When all devices have the same address, all the units will “listen” to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will “listen” to a separate channel
number. Changing the settings of one channel will only affect the device in question.
7.5 DMX Channel Values
channel mode
from to function
21 17
1
pan
0 255 pan
1
pan/pan shaking
0 127 pan
128 255 pan shaking, slow > fast
2
tilt/tilt shaking
0 127 tilt
128 255 tilt shaking, slow > fast
2
pan fine
0 255 pan fine (16 bit)
3
tilt
0 255 tilt
4
tilt fine
0 255 tilt fine (16 bit)
5
pan shaking
0 7 no function
8 255 pan shaking, slow > fast
6
tilt shaking
0 7 no function
8 255 tilt shaking, slow > fast
7 3
colour
0 2 white
3 4 white + colour 1
5 6 colour 1
7 9 colour 1 + colour 2
10 11 colour 2
12 13 colour 2 + colour 3
14 15 colour 3
16 18 colour 3 + colour 4
19 20 colour 4
21 22 colour 4 + colour 5
23 24 colour 5
25 27 colour 5 + colour 6
28 29 colour 6
30 31 colour 6 + colour 7
32 33 colour 7
34 36 colour 7 + colour 8
37 38 colour 8
39 40 colour 8 + colour 9
41 43 colour 9