HQ Power HQLB10003, Руководство пользователя

Страница: 9 / 58

HQLB10003
V. 04 – 05/03/2019 9 ©Velleman nv
6.2 Menu
mode programming description
DMX mode Addr
6CH
d001-d512
4CH
2CH
1CH
auto Auto Au1-3 auto programme 1-3
sound Soun So1-3 sound programme 1-3
speed SPEE SP1-9 adjustable speed
sensitivity SEns SE1-9 adjustable microphone sensitivity
edit colour Colo
U000-255 warm white, 0-100 %
C000-255 cold white, 0-100 %
colour
temperature
tEMP
3200 3200 K
4300 4300 K
5600 5600 K
6500 6500 K
dimming dIMM dI1-9 adjustable dimming value
silent scene SILE on/oFF
closed/open light when no music
in sound mode
slave SLAV slave slave mode
6.3 Stand-Alone Mode
The device starts running in stand-alone mode after connection to the mains. This mode
allows you to use the device without controller.
6.4 Master/Slave Mode

The master/slave mode allows for connecting several devices to a single master device
in a daisy chain.

All slave devices will then work synchronously with the master device.

Configure all slave units before connecting the master unit to the daisy chain.
6.5 DMX Mode
The DMX mode allows you to control the device with any universal DMX controller.

All DMX-controlled devices need a digital start address so that the correct device
responds to the signals. This digital start address is the channel number from which
the device starts to “listen” to the DMX controller. The same starting address can be
used for a whole group of devices or an individual address can be set for every
device.

When all devices have the same address, all the units will “listen” to the control
signal on one particular channel. In other words: changing the settings of one
channel will affect all devices simultaneously. If you set individual addresses, each
device will “listen” to a separate channel number. Changing the settings of one
channel will only affect the device in question.
DMX Channel Values
Refer to page 3 of this manual.