VDPLW1203RGB
Rev.
01
19/06/2009
© 2009
Velleman nv
6
7.
Operation
DMX mode
•
The VDPLW1203RGB can operate in 5 different channel modes (15 – 12 – 6 – 4 – 3):
DMX mode
LED control model
LED
channel
internal
program
strobe dimmer
/
speed
15 channel each LED can be controlled individually
1~12
13
14
15
12 channel each LED can be controlled individually
1~12
N/A
N/A
N/A
6 channel each colour can be controlled
1~3
4
5
6
4 channel each colour can be controlled
1~3
N/A
N/A
4
3 channel each colour can be controlled
1~3
N/A
N/A
N/A
Internal program – Strobe – Dimmer/speed
•
In 15 channel mode, the VDPLW1203RGB will listen to the controller on channel 13 for internal
program information and on channel 14 for strobe effect information.
•
In 6 channel mode, the VDPLW1203RGB will listen to the controller on channel 4 for internal
program information and on channel 5 for strobe effect information.
•
When an internal program is selected, the last channel becomes the speed control (slow to fast).
•
When no internal program is selected, the last channel becomes the dimmer control.
•
Following table gives an overview of the corresponding values for internal program and strobe
functions:
internal program
strobe
0 ~10
no function
0
open
11 ~ 40
program 1
1 ~ 95
strobe from slow to fast
41 ~ 70
program 2
96 ~ 127 open
71 ~ 100
program 3
128 ~ 159 pulse strobe from slow to fast
101 ~ 130
program 4
160 ~ 191 open
131 ~ 160
program 5
192 ~ 223 random strobe
161 ~ 190
program 6
224 ~ 255 open
191 ~ 220
program 7
221 ~ 255
program 8
Menu display
•
Enter the menu by pressing the ‘menu’ button
[13]
.
•
Use the ‘up’
[14]
and ‘down’
[15]
buttons to navigate through the menu. Use the ‘enter’-button
[16]
to select a menu.
•
Use the ‘up’
[14]
and ‘down’
[15]
buttons to change settings. Confirm and save by pressing the
‘enter’ button
[16]
(except for address setting where the menu-button
[13]
will save and exit).
•
Refer to the table below for an overview of the menu structure.
(mode)
(address)
Set address (1~512)
Default: 001
(display)
Display ‘blackout’ function: when ‘on’, the display will automatically
switch off when not in use. Default: on
(flip)
Set to ‘on’ to rotate the display 180°.
Default: off
(channel)
Select 3-channel mode (default)
Select 4-channel mode.
Select 6-channel mode.
Select 12-channel mode.
Select 15-channel mode.
(slave)
Set the VDPLW1203RGB in ‘slave’ mode.
