Switching On and Off:
Connect power to the unit and switch the mains on. Switch on the unit.
When switching off the unit: switch off the amplifier first.
When switching on the unit: The display shows the welcome screen.
After a short period the display menu shows.
Selecting input:
Push
S+
or
S-
buttons on the front panel to select the wanted input.
When the input is selected and locked, the front panel displays input
type, which can be either PCM or DSD. For PCM input the sampling
frequency shows and for DSD input the sampling rate shows.
Altering the Volume Level
The volume can be adjusted by using the front panel buttons
V+
or
V-
.
The front panel displays the volume level.
Mute:
To mute the analog output, push the
Mute
button. Push the
Mute
again for unmute the analog output. The Front panel will
display the Mute status.
Features:
The front panel features the Bal/unbal function by pushing both
S+
and
S-
at the same time. This feature will improve the analog output
sound performance on the RCA connector only. If you are using the
balanced output then the analog output signal will silence.
Operational
Operational
