HPRT PPD3, Руководство пользователя

Страница: 5 / 30

PPD3 User Manual
2
IMPORTANT SAFETY INSTRUCTIONS
This section presents important information intended to ensure safe and effective use of this product. Read this
section carefully and store it in an accessible location.
1. Safety warnings
WARNINGS

The print head will become very hot during printing; avoid contact with the print head after printing has
finished.

Never attempt to repair this product yourself. Improper repair work can be dangerous.

Never disassemble or modify this product. Tampering with this product may result in injury, fire, or
electric shock.

This is a Class A product. In a domestic environment this product may cause radio interference in which
the user may be required to take adequate measures.
WARNINGS

Do not touch the printer head and connector in case static damage the printer head.
2. Instructions
Read the following instructions thoroughly before starting up your printer.
1) Choosing A Place for the Printer
Before actually unpacking the printer, you should take a few minutes to think about where you plan to use it.
Remember the following points when doing this.

Choose a firm, level surface where the printer will not be exposed to vibration.

The power outlet you plan to connect to for power should be nearby and unobstructed.

Make sure that the printer is close enough to your host computer for you to connect the two.

Make sure that the printer is not exposed to direct sunlight.

Make sure that the printer is well away from heaters and other sources of extreme heat.

Make sure that the surrounding area is clean, dry, and free of dust.

Make sure that the printer is connected to a reliable power outlet. It should not be on the same
electric circuit as copiers, refrigerators, or other appliances that cause power spikes.

Make sure that the room where you are using the printer is not too humid.

This device employs a DC motor and switches that have an electrical contact point.

Avoid using the device in environments where silicon gas can become volatile.

When disposing of the printer, obey local regulations.

Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise.
Immediately unplug the equipment and contact your dealer for advice.

Never attempt to repair this product yourself. Improper repair work can be dangerous.

Never disassemble or modify this product. Tampering with this product may result in injury, fire, or
electric shock.