Loading Ribbon
Loading Media
1.Open the printer cover.
2.Hold the left and right
ribbon’s handhold vanes, then insert
the ribbon as shown and push the ribbon down until it clicks.
Handhold Vane
3.
Rewind the ribbon feed mechanism to make it
smooth.
4.Close the printer cover.
1.Make sure th
e ribbon is properly loaded and the cover of the
printer is closed.
2.Turn the printer power on. Touch power button for
about 2 seconds.
3.Put the paper into the
paper entry slot
in parallel.Printer will
feed a distance automatically after it detects the paper. A
buzzer will sound once when paper is successfully loaded,
otherwise the operation is wrong.
Removing Media
Connect the Power Supply
Caution:
Do not pull the paper out forcefully while the printer cover is
closed, Otherwise may cause damage. Please remove the paper
according to follow steps:
1.Open the printer cover.
2.Pull the media out of printer in either direction.
AC Power Cord
AC Adapter
1.Connect the power cord to the adapter.
2.Connect the adapter to the power connector of the printer.
3.Plug the power cord into a power outlet.
Connect the USB Interface
3.Close the printer cover.
4.Insert a new sheet of media and print again.
W
elc
ome...
