No wiring is required.
Door Chime Receiver
The Chime Unit (Fig. 1) can be
powered by 3 x ‘C’ size batteries
(not included) or can be plugged in
to a powerpoint using the external
DC adaptor socket (Fig. 1 A)
(adaptor not included).
IF USING DC ADAPTOR:
Simply
plug a 9V DC adaptor into the DC
adaptor socket (Fig. 1 A), plug the
other end of the adaptor into any
standard 240V power point and
switch the power point ON.
IF USING BATTERIES:
Alkaline batteries are recommended for longer life. For best performance do not use
rechargeable batteries, do not mix old and new batteries or batteries of different types.
Step 1:
Remove the cover of the Battery Compartment (Fig. 1 F)
Step 2:
Insert 3 x ‘C’ size alkaline batteries into the Battery Compartment (Fig. 1 F) ensuring the (+) end of
the batteries are at the (+) in the Battery Compartment.
Step 3:
Replace Battery Compartment cover. The Chime Unit is fully portable. It is free-standing and can be
placed anywhere in the home. It can also be fixed to a wall by using the slotted hang hole (Fig. 1 E)
on the back. The Chime Unit is not weatherproof. Do not expose to rain or immerse in water.
Bell Press Transmitter
Step 1:
Remove the security screw at the bottom of the Bell Press Unit. - (Fig. 2 L)
Step 2:
Remove the Bell Press (Fig. 2 G) from the Mounting Bracket (Fig. 2 J). Open the Battery
Compartment cover on the back of the Bell Press. Insert 12V battery provided into the Battery
Compartment (Fig.2 K) ensuring that the (+) end of the battery is at the (+) in the Battery
Compartment. Replace Battery Compartment cover.
Step 3:
Ensure the channel selected is the same as the channel selected on the Chime Unit
(refer Channel Selection section).
Step 4:
Select tune you wish to hear (refer Tune Selection section).
Step 5:
Press the Bell Press Button (Fig.2 I) to ensure that the red indicator light (Fig. 2 H) illuminates,
indicating that the battery is correctly installed, and to test satisfactory operation. The Bell Press is
suitable for outdoor use, however for best performance and a longer life the Bell Press should not
be exposed to direct sunlight or rain.
Step 6:
Secure the Mounting Bracket (Fig. 2 J) using the 2 x screws/ wall plugs or double sided tape
provided. To ensure that the weatherproofing is maintained, mount the Bell Press in upright
position. The Bell Press (Fig. 2 G) can then be inserted into the Mounting Bracket (Fig. 2 J) and
securely fastened at the bottom using the security screw supplied (Fig. 2 L).
3 Installation
Press Unit being used it is likely that another unit operating nearby, using the same frequency channel, is
the cause. You will need to select a different channel:
Step 1: On the Bell Press Unit
-The Channel Selection Switches are the first 6 switches located inside the
Bell Press Battery Compartment (Fig. 2 K). Remove the Bell Press (Fig. 2 G) from the Mounting
Bracket (Fig.2 J). Open the Battery Compartment cover on the back of the Bell Press. Select a
different channel by moving one or more of the 6 Channel Selection Switches to the ON position.
Step 2: On the Chime Unit -
The Channel Selection Switches are located inside the Battery
Compartment (Fig. 1 F). Move the Channel Selection Switches so that they correspond exactly
to the Channel Selection Switch positions you have set on the Bell Press Unit. Test to ensure
correct operation.
6 Tune Selection
Inside the Battery Compartment of the Bell Press Unit (Fig. 2 K) there is a row of 8 switches. The last
2 switches are for Tune Selection and represent the 2 tunes available - Ding Dong or Westminster. To
change the tune, simply select the other Tune Selection Switch.
7 Volume Selection
The Volume Control (Fig. 1 D) enables you to adjust the volume of your HPM Door Chime (HIGH or LOW)
or turn it OFF completely.
8 Flashing Light Selection
The Flashing Light Control (Fig. 1 C) enables you to have a light (Fig. 1 B) flash when the Door Chime Unit
is activated . This can be in addition to or instead of the tune sounding. Simply position the Flashing Light
Control (Fig. 1 C) in either the ON or OFF position. Perfect for hearing impaired, families with children,
shift workers not wanting to be woken or if there is loud background noise eg. when vacuuming.
Press the Bell Press Button (Fig. 2 I) to sound the Chime Unit. Press again to repeat the chime. The operation
and range of your HPM Door Chime will depend on location, temperature and battery condition.
4 Door Chime Operation
Inside the Battery Compartment of both the Bell Press (Fig. 2 K) and the Chime Unit (Fig.1 F) there are 6
Channel Selection Switches.
It is essential that the Channel Selection Switches be in the same position on
both units for them to recognise each other.
In the event that your Door Chime Unit sounds without your Bell
5 Channel Selection
9 Troubleshooting
PROBLEM
POSSIBLE CAUSE
SUGGESTED SOLUTION
The Door Chime is
intermittent when it
is activated or sounds
when not activated.
A similar door chime with the same
frequency is operated nearby.
Change the channel of your Door
Chime and Bell Press (refer to
Changing Operating Channels).
