NOTE:
If the language selection screen does not
display, contact Hewlett Packard Enterprise support
center (
https://www.hpe.com/us/en/contact-
).
Follow the instructions provided in the wizard:
Procedure
1.
Select your preferred language.
NOTE:
If you are setting up a two node cluster, make
the selection on one node only. The selected node is
the primary node.
2.
Read and accept the license terms.
3.
Create a two node cluster
a.
Click
No
to create a single node server.
b.
Click
Yes
to create a second node cluster.
After the second node is located, you will see the
language selection on the second node is
selected based on the primary node language
selection.
The license screen is displayed for the second
node.
NOTE:
The second node installation process is
stalled until you accept the license agreement.
c.
Accept the license for the second node
4.
Go back to the primary node and select the HPE
Storage Array that you want to connect to the
Storage File Controller
If your array is not Nimble or 3PAR array, then select
MSA/Other
.
5.
After selecting the storage array type, the installation
begins installing various components based upon the
array type selected. This process takes
approximately 20 minutes to complete.
Page 9